Checking the Status of Fax Jobs
This section describes how to check/change the status of TX (Transmission) jobs.
NOTE
•
If Job Log Display in System Settings (from the Additional Functions screen) is set to
'Off', [Log] is not displayed on the System Monitor screen.
3
•
For instructions on checking and changing the status of send jobs to e-mail, I-fax, or file
server addresses, see Chapter 6, "Checking/Changing the Send/Receive Status," in the
Sending Guide.
•
The maximum number of jobs that are displayed is:
- TX Job Status screen: 70 jobs
- Log screen:
•
When the maximum number of jobs that can be displayed is reached, the oldest job is
deleted each time a new job is added.
Checking TX Job Details
You can check the detailed information of any transmission job, such as the
destination and the date and time the job was specified.
1
3-2
Checking the Status of Fax Jobs
128 jobs
Press [System Monitor].