Dip Switch Description - Eaton Power Xpert Gateway Series 1000 Card User Manual

DIP Switch Description

DIP switch definitions for the PXGX Series 1000 Card are listed in
Table 13.
Table 13. DIP Switch Definitions
EATON Power Xpert
S1 Position OFF Position (Default)
Number
1 Enable previously stored network
configuration settings (Normal
mode)
2 Enable the front panel RJ-45 for
serial communication
3 Normal behavior
4 Reserved
5 Reserved
6 Normal behavior
® Gateway Series 1000 Card User's Guide
OPERATION AND MAINTENANCE
ON Position
Override network settings to
assign private IP addresses
(Configuration mode); Port 1 is set
to 192.168.1.1 and Port 2 is set to
192.168.1.2
Enable the front panel RJ-45 port
for communication with an
Environmental Monitoring Probe
(EMP) device for immediate or
future use
Reset the HTTP passwords to the
defaults on boot (user and
admin). After a successful boot,
the switch should be turned back
off before rebooting the card.
Reserved
Reserved
Reset the card to factory defaults
on boot (after a successful boot,
the switch should be turned back
off before rebooting the card)
S
164201670 Rev 1
73