Configuring Auto Discovery Settings - Eaton Power Xpert Gateway Series 1000 Card User Manual

Configuring Auto Discovery Settings

Configure the Auto Discovery settings so that the Power Xpert Software
can find the PXGX Series 1000 Card on the network automatically. The
card sends multicast discovery messages to any control Power Xpert
host monitoring the specified Listen port.
To configure the auto discovery settings:
1.
2.
3.
4.
EATON Power Xpert
From the card's Web page, click the Auto Discovery link from the
menu bar.
The default Listen port is 1900. To modify, enter a value between
10000 and 65535.
The default Announce period is 600 seconds. To modify, enter a
value between 60 and 1800 seconds.
The default Announce TTL is 4 hops. To modify, enter a value
between 1 and 254.
® Gateway Series 1000 Card User's Guide
CONFIGURING THE CARD
S 29
164201670 Rev 1