Management From An Snmp Nms - Eaton Power Xpert Gateway Series 1000 Card User Manual

CONFIGURING THE CARD

Management from an SNMP NMS

To access the PXGX Series 1000 Card via SNMP:
1.
2.
MIB Name
Eaton PDU MIB
Eaton EMP MIB
Eaton Alarms+Traps MIB
Eaton Object Identifier (OID)
assignments
RFC 4133 Entity MIB
RFC 4268 Entity State MIB
RFC 4268 Entity State MIB, part 2
3.
24
EATON Power Xpert
Use these default Community strings:
GET Community string: public
SET Community string: private
From the card's Web page, click the Documentation link from the
menu bar (or visit www.eaton.com/powerxpert) for the following
MIB files for the PXGX Series 1000 Card:
Filename
EATON-PDU-MIB.txt
EATON-EMP-MIB.txt
EATON-PXG-MIB.txt
EATON-OIDS.txt
ENTITY-MIB.txt
ENTITY-STATE-MIB.txt
ENTITY-STATE-TC-MIB.txt
Add these files to the MIB database of your SNMP management
software (such as HP OpenViewt IBM
NetManager).
Use the facilities provided by the SNMP management software to
access the individual MIB objects. See Chapter 4, "MIB Files," on
page 45 for more information.
® Gateway Series 1000 Card User's Guide
Description
Meters available from the PDU, including
identification, input, output, configuration,
tests, alarms, bypass, traps, panel data, and
circuit breaker data
Meters and settings for the EMP
Alarms and notifications (traps)
Base document for all OID assignments for
Eatons MIBs
Identification and description of each device
attached to the card
Five availability status meters for each
device attached to the card
Possible state values for the Entity State MIB
R Director, and Sun
,
S
164201670 Rev 1