Panel Registers And Alarms; Panel Summary Registers (Fc 04) - Eaton Power Xpert Gateway Series 1000 Card User Manual

MODBUS REGISTERS
Table 4. PDU/RPP Alarms (FC 02) (continued)
Name

Panel Registers and Alarms

This section contains information for the Panel Summary Registers
(FC 04) and the Panel Alarms (FC 01 or 02).

Panel Summary Registers (FC 04)

NOTE The panel can be wired for either a wye (phase to neutral) or a delta
(phase-to-phase) configuration. The registers contain only the data supported by the wired
configuration. For example, if the panel is wired in a wye configuration, the voltages AN, BN,
and CN are available, but the voltages AB, BC, and CA are not available (an exception code is
returned). Refer to the actual panel for the wiring configuration.
Table 5 shows the registers that contain summary data for the panel.
The registers contain the total information for all the breakers in the
panel.
60
EATON Power Xpert
Branch Breaker Overload Warning
Branch Breaker Overload
Branch Breaker Disconnected
Main Breaker Overload Warning
Main Breaker Overload
Primary Breaker Open
Primary Breaker Tripped
Secondary Breaker Open
Secondary Breaker Tripped
Input Phase Rotation
® Gateway Series 1000 Card User's Guide
Register
1249
1250
1252
1253
1254
1256
1257
1258
1259
1477
S
164201670 Rev 1
Data Type
BOOL
BOOL
BOOL
BOOL
BOOL
BOOL
BOOL
BOOL
BOOL
BOOL