Servo Step 3 - Navigate to the Process Settings Tab
See Figure 4-7.
iQ Explorer, Process Settings
Figure 4-7
Servo Step 4 - Process Settings > Initiate Mode > Manual
See Figure 4-8.
Select Manual in
Initiate Mode.
Figure 4-8
Dukane Manual Part No. 403-575-00
]
]
iQ Explorer, Process Settings > Initiate Mode
Process Settings Tab
This Initiate Mode selection as-
sumes there is a stand-alone,
benchtop system with manual acti-
vation switches.
Section 4 - Operation
NOTE
Page 45