Using the Main Menu
Device
The Device menu allows you
to configure hard drive,
alarm, PTZ, Mobile and
................Motion settings.
To open the Device menu:
Right-click>Main Menu>Device
The Device menu contain the following
sub-menus:
• HDD
• Alarm
• PTZ
• Mobile
• Motion
HDD
Configuring Hard Drive settings
To format the hard drive:
1
From the Device menu, click HDD.
2
Click the checkbox under Select to choose
the drive you wish to reformat.
3
Click Format HDD.
4
When the warning window appears, click
OK. Wait for the system to format the hard
drive.
42
To set the hard drive recording mode
(loop or linear):
1
Click HDD.
2
Click the checkbox under Select to choose
the drive you wish to configure.
3
In the Overwrite drop-menu, select AUTO
for the system to continually loop the
recording (recommended).
• If desired, select the duration you want the
hard drive to store the content for "linear"
recording. Select from 1hr ~ 90 days.
4
Click Apply to save your settings.
To format a USB memory stick:
1
Insert a USB memory stick into the rear
panel of the system.
2
Click HDD.
3
Under the Select checkbox, select the USB
memory drive.
4
Click Format USB.