Remote Control (4 & 8 Channel) - Lorex VANTAGE LH110 ECO SERIES Instruction Manual

Remote Control (4 & 8 Channel)
The remote control is the secondary input
device for navigating the system's interface.
To use the remote control:
1 Number Keys (1 -9)
channel in full screen mode
0 0
• : Press three times to switch between VGA
output and BNC Video Out output.
• : Changes view of system channel (i.e.
Channels 1-4, 5-8, split-screen etc.)
MENU
• : Opens the Main Menu. Within menus,
the MENU button is used to exit the menu.
2 Navigation Cursors
cursors to navigate the menu.
• : Confirms the selection in the menu.
• Press to access System Information
during live view.
3 SUB MENU
: Opens the system sub menu.
4 MUTE
: Mutes audio channel during live view
and playback.
5 Playback Controls
• : During playback, press repeatedly to
increase playback speed
• : During playback, press repeatedly to
increase reverse playback speed
• :
• In live view, press to open the Record
Search Menu
• During playback, press to play video.
.
• :
.
• In live view, press to start sequence
view. During playback, press to pause
video
• : Record: Press to resume recording
• : Press to stop recording.
: Selects the desired
: Use the navigation
:
Remote Control (4 & 8 Channel)
1
2
3
*Audio capable cameras (not included) are required for audio
recording and listen-in audio functionality.
TIP: When using the remote
control to enter password and
camera titles, select the field
using the navigation buttons,
press , and then press the
number buttons.
4
5
13