Lorex Vantage ECO LH110 Series Quick Setup Manual

Quick Setup Guide
ECO LH110 Series
Digital Video Surveillance Recorder
Instant
Mobile
Viewing
PACKAGE CONTENTS:
1 X Eco Digital Video Recorder With Pre-Installed HDD*
1 X USB Mouse
1 X Power Adapter
1 X Remote Control
1 X Ethernet Cable
1 X Instruction Manual
1 X Quick Start Guide
1 X CD
ATTENTION:
• This guide refers only to the DVR set-up.
• DVR model, number of channels/port configuration and HDD (hard disk drive)
capacity may vary by model. Check your package for specific content information.
• Monitor and cameras are not included.
• Broadband router and computer are required for local and remote monitoring (not
included).
It's all on the Web
For detailed setup information, please refer to
your included User's Manual. For additional
information, please visit our website
www.lorextechnology.com
* For setup of Instant Mobile Viewing
refer to your User Manual.
Information in this document is subject to change without notice. As
our products are subject to continuous improvement, Lorex Technology
Inc. and our subsidiaries reserve the right to modify product design,
specifications and prices, without notice and without incurring any
obligation. E&OE © 2012 LOREX. All rights reserved.
Time
BASIC SETUP
under 15 minutes under 30 minutes under 60 minutes
Time
Hand Tools Hardware
BASIC INSTALLATION GUIDE
Router
under 15 minutes under 30 minutes under 60 minutes over 60 minutes
Time: 20 Minutes Hand Tools Skills - Easy
STEP 1
Skill Level
Hand Tools Hardware Hi Speed
Router easy Intermediate
Skill Level
Connecting Cameras
(not included)
easy Intermediate advanced
Connect BNC cameras to the
1
BNC ports (VIDEO INPUT)
on the rear panel.
NOTE: Test the cameras prior to
selecting a permanent mounting
location by temporarily
connecting the cameras and
NOTE: the four channel
cables to your DVR.
model is shown
Connecting the USB Mouse
Connect the USB mouse
2
to the top USB port on the
back panel of the DVR.
Connecting a Monitor
(not included)
Connect the VGA cable (not
3a
included) from your LCD
monitor to the VGA port on
the rear panel of the DVR.
OR
From one of the VIDEO
3b
OUTPUT ports connect a BNC
terminated cable (not included)
to a TV or CCTV monitor.
Connecting the Ethernet Cable
Connect one end of the
4
Ethernet cable to an available
LAN port of your router (not
included) and the other end to
the DVR's Network Port.
Powering ON the DVR
Connect the power cable to
5
the DC 12V port on the rear
panel and the power cord into
an electrical outlet. The system
turns on automatically once the
power cord is plugged in.
At startup, the system performs
NOTE: Make sure all cameras
a basic system check and runs
and cables are properly
an initial loading sequence.
connected prior to powering
After a few moments, the system
on the system.
loads a live display view.
NOTE: If your monitor is not automatically detected, the DVR front
panel buttons, mouse and remote control may not respond. To fix this,
simply press "0" three times on the remote control or press and hold
the (rewind) button on the DVR front panel until you hear a beep.
For more information, please refer to the User's Manual.
Time
BASIC SETUP
over 60 minutes under 15 minutes under 30 minutes under 60 minutes
Time
Hi Speed Hand Tools Hardware
BASIC INSTALLATION GUIDE
Router
under 15 minutes under 30 minutes under 60 minutes over 60 minutes
Time: 20 Minutes Hand Tools Skills - Easy
STEP 1
Skill Level
Hand Tools Hardware Hi Speed
Continued
advanced Router easy Intermediate
Skill Level
Setting the Date & Time
easy Intermediate advanced
1. Right-click anywhere on the screen to open the Sub-
6
Menu and select MAIN MENU.
2. Click Advance > DATE/TIME.
3. Configure the date and press UPDATE NOW to save
your settings. Press APPLY and then EXIT.
It is important to set the correct time to assure accurate time
stamps on video recordings.
Managing Passwords
By default, passwords are disabled on the system.
7
You do not need to enter a password when accessing any
system menus.
NOTE: By default, the DVR username and password are
left blank
NOTE: For security purposes, it is highly recommended to
enable passwords on the system using the Password Menu.
Please refer to the owner's manual for more information.
Time
NAVIGATION AND CONTROLS
over 60 minutes
under 15 minutes under 30 minutes under 60 minutes over 60 minutes
Hi Speed
Hand Tools Hardware Hi Speed
BASIC INSTALLATION GUIDE
Router
STEP 2
Time: 20 Minutes Skills - Easy
Skill Level
advanced
easy Intermediate advanced
Using the Main Menu
Right-click anywhere on-screen
1
to open the Sub-Menu and select
1 2 3
MAIN MENU (mouse only), or
press the MENU button on the
remote control or the MENU button
4 5 6
on the system front panel of the DVR.
NOTE: If passwords are enabled
on the system, you need to select
1. Display 4. Search
your Device ID and enter the
2. Record 5. Device
6-digit numerical password to
3. Network 6. Advance
open the Main Menu.
Using a Mouse (Recommended)
1: Left-Button: Click to select a menu
2
option; during live viewing in split-
screen, double-click on a channel
3
to view the selected channel in
1 2
full-screen.; double-click the channel
again to return to split-screen view.
2: Right-Button: Click to open the
Sub-Menu or to exit from a menu.
3: Scroll-Wheel: No function.
Other Control Options
The DVR can also be controlled using the front panel
3
buttons and the included remote control.
Please refer to the User's Manual for more information on
these methods.
Front Panel Buttons
Remote Control
You have completed STEPS 1 & 2 successfully. Your DVR
is now ready to use. Refer to the owner's manual to learn
how to record, playback, search and for all other features
available with this DVR.
Time
SET-UP LOCAL VIEWING ON YOUR PC
under 15 minutes under 30 minutes under 60 minutes over 60 minutes
Time
Hand Tools Hardware Hi Speed
BASIC INSTALLATION GUIDE
STEP 3 Time: 30 Minutes Hardware: Skills - Intermediate
Router
under 15 minutes under 30 minutes under 60 minutes over 60 minutes
PC/Router
Skill Level
Hand Tools Hardware Hi Speed
easy Intermediate advanced
Router
Skill Level
Retrieve the DVR Information
easy Intermediate advanced
This step will teach you how to locally
1
view your system over the LAN (local
area network) using your PC.
NOTE: This method only works
if your computer is on the same
network as the DVR.
To record your IP Address, Mac Address
and Web Port right-click in the viewing
window, and then click
Main Menu>Advance>Information
Record the information in the section below:
IP ADDRESS: _______._______ ._______._______
MAC ADDRESS: _____:_____:_____:_____:_____:____
( Re quire d f or D D N S reg istra tio n)
WEB PORT:
_________
Logging into Lorex Web Client (LOCALLY)
1. Launch Internet Explorer.
2
2. In the address bar, enter the IP address of your DVR (recorded
in the previous step)
NOTE: Enter http:// followed by the IP address of your DVR (recorded
in step 3-1), then a colon followed by the Web Port number
i.e. http://192.168.X.XXX:80
3. Enter your user name and
password, then click LOGIN.
Your default login:
Username is "admin"
Password is left blank
®
4. You must install the ActiveX plug-in for DVR Netviewer to function.
Click the attention bar at the top of the main page and select
Install ActiveX Control. Lorex Web Client will reset.
5. Log in with your LAN user name and password. From the security
window, click Install.
Live Viewing Using the Web Client (LOCALLY)
Upon login, the Web Client main screen appears in your browser.
3
For a full
explanation of all
the buttons and
features, please
refer to the User's
Manual.
Congratulations! You can now view & playback video on your via your LAN.
LH110 Series Quick Setup Guide - English - R4