Display; Changing The Channel Name; Changing The Position Of The Channel Name; Adjusting The Image Color - Lorex VANTAGE LH110 ECO SERIES Instruction Manual

Using the Main Menu

Display

The display menu allows you
to configure DVR image
settings, and general
settings on how your DVR displays
names and titles on screen.
To open the Display menu:
Right-click>Main Menu>Display
Tip: When you want to apply the setting
to multiple channels, click the "Copy
To" drop-down menu, and select All.
Click the Copy button to copy the setting
across all channels.

Changing the channel name

1 In the Channel drop-down menu, select
the channel that you wish to re-name.
Channel drop-down menu
2 Double-click the field beside Name. Use
the mouse to enter in the new channel
name.
3 Click Apply to save your settings.
Changing the position of the
channel name
1 In the Position drop-down menu, select
one of the following:
• U-L : Upper left hand corner
• D-L: Lower right hand corner
• U-R: Upper right hand corner
• D-R: Lower right hand corner
2 Click Apply to save your settings.
34

Adjusting the image color

1 Click the Setup button. The Color Setup
window opens.
2 Drag the slider to adjust the color values
for the following: Hue, Brightness,
Contrast, Saturation.
3 Click Apply to save your settings.

Enabling Covert Recording

Covert Recording blanks out the screen
so that it seems as if the system is not
recording.
To enable covert recording:
1 In the Channel drop-down menu, select
the channel you wish to apply covert
recording to.
2 In the Covert drop-down menu, select
Enable.
3 Click Apply to save your settings.
Configuring the Time and
Recording Time display
To add/remove the time stamp in the
system display:
1 In the Show Time drop-down menu, select
enable or disable.
2 In the Record Time drop-down menu,
select enable or disable.
3 Click Apply to save your settings.