Using The Onscreen Display - Lorex VANTAGE LH110 ECO SERIES Instruction Manual

Using the Onscreen Display

Use the system's graphical onscreen display to navigate menus and configure options and
settings.
M
C
1 Date & Time: Displays the date and time on the system
2 Record Status: Displays the current recording status of the system: C=continuous (normal
recording); M=motion recording
3 Channel number / Channel title: Displays channel number or channel title. To rename the
channel number to a title, see "Changing the channel name" on page 34.
Tip:
If you can't see your mouse cursor on screen:
You may have switched output modes from VGA to BNC. By default, the DVR outputs
to VGA mode at 1024 x 768 resolution.
4/8 Channel
16 Channel
C
C
How To Change Video Outputs
Front Panel
Press and hold the
Rewind button for 6
seconds.
0
Press and hold for 6
seconds.
Using the Onscreen Display
1. Date & Time
2. Record Status
3. Channel number /
Channel Title
Remote
0
Press three times.
0
Press three times.
17