Lorex LHB806 Quick Connection Manual

HD Wire-Free Security System
GUIDE
1 / 2
English Version 1.0
Package Contents
Rechargeable
Power Pack*
HD DVR DVR Power
(Model Number: LHB806) Adapter
STEP 1: Initial Setup
Before you begin, you will need to prepare the wire-free cameras and
power packs.
NOTE: Power packs come fully charged with no need for initial charging.
To prepare the cameras and receiver:
1. Peel off the PLEASE REMOVE label covering the
contacts on each power pack. Insert the charged power
packs into each camera base. Push up until the power
pack 'clicks' firmly into place.
2. Twist the adjustment ring near the camera base
counterclockwise to loosen and reposition each
camera as shown to the right.
white antennas to each camera.
* Top view

Need Help?

Visit us online for up-to-date software and complete instruction manuals.
1
Visit lorextechnology.com
Search for the model number
2
Click on your product in the
3
4
Click on the Downloads tab
Copyright © 2017 Lorex Corporation
As our products are subject to continuous improvement, Lorex reserves the right to modify product design,
specifications and prices, without notice and without incurring any obligation. E&OE. All rights reserved.
Quick Connection Guide
www.lorextechnology.com
* Per camera in multi-camera packs
HD Wire-Free Security Cameras
(Model Number: LWB3801)
Camera Antenna*
USB Mouse
Power Pack
Ethernet Cable
Adapter
Adjustment ring
Connect one of the
of your product
search results
STEP 2: Setting Up the DVR
Next, you must set up the DVR and connect it to your network.
To set up the DVR:
1. Connect the DVR to your router
using the included Ethernet cable.
DEVICE ID: xxxxxxxxxxxxx
• This guide describes basic setup of the DVR only. This
installation is intended for users who wish to monitor their
system using the free Lorex Secure app on their smartphone
or tablet.
• You may choose to use the DVR interface to control your
wire-free security system. Connect the included USB mouse
to one of the USB ports labelled Mouse / Backup, and
connect a monitor using the included HDMI cable. See the
included Quick Reference Guide for details.
STEP 3: Connecting with Lorex Secure
Connect to your system using the free Lorex Secure app for smartphones and
tablets (iOS and Android).
To connect with Lorex Secure:
1. Download and install the free Lorex Secure app from the
App Store or Google Play Store.
Mounting Kit*
2. Tap the Lorex Secure icon to launch the app.
3. Tap SIGN UP. Enter your email address and password to create a new account.
HDMI Cable
NOTE: If this is not the first device on your account, log in using your email
address and password, then tap LOG IN. Tap
Proceed to step 6.
4.
6. Scan the QR code on the back of your DVR using the camera
on your smartphone or tablet.
*
7. Enter your DVR's user name (default: admin) and password
(default: 00000000). Tap DONE.
8. Enter a new, secure 8-15 character password. This password
will be used to connect to your system from now on.
Record your password below and store in a secure place:
9. Your system will appear on the homescreen of the app. Tap each channel with
a camera connected then tap the play button (
NOTE: If you do not see video from one or more cameras, ensure you have
removed the PLEASE REMOVE label from the power pack. If the issue persists,
see the "Troubleshooting" section on the back of this document.
10. Remove the power pack from each camera by pushing
both release buttons*, then pulling down on the power
pack.
ATTENTION:
pack when removing to prevent it from falling.
2. Connect the included power adapter
to the DVR. Wait a few minutes for
the system to start up.
DEVICE ID: xxxxxxxxxxxxx
OPTIONAL: Full DVR Setup
5.
Tap
ADD DEVICE
Place your hand underneath the power
DEVICE ID: xxxxxxxxxxxxx
and then Security System.
Tap
Security System
DEVICE ID: xxxxxxxxxxxxx
) to stream live video.
* *
LHB800_QCG_EN_R1