Configuring DST (Daylight Saving Time) Settings
If your region observes DST, use the DST menu to configure when the system changes its
time.
To configure DST settings:
1
Click Remote Setting>System>DST.
2
Configure the following:
• DST: Select Enable or Disable.
• Time Offset: Select 1hr or 2hr time offsets.
• Daylight Saving Time Mode: Select Week or Date.
• Start Time: Select the starting month, date and time DST should begin.
• End Time: Select the ending month, date and time DST should end.
• If you select Date in the Daylight Saving Time Mode drop-down menu, select the desired date
and start time DST should begin.
3
Click Apply to save your settings.
Remote Viewing
Click the Date drop down menu
Enter the DST start and end time
81