External Device; Tcp/Ip Setup - Ip Setup; Tcp/Ip Setup - Ddns Setup - Lorex L19LD1600 Series Instruction Manual

EXTERNAL DEVICE

EXTERNAL DEVICE
1. TCP/IP SETUP - Configure the system
Networking information.
2. PAN/TILT SETUP - Set up the parameters
of the PTZ control.
3. SPOT SETUP - SPOT output setup.
4. RS232C SETUP - Set up the parameters
of the RS232 port.

TCP/IP SETUP - IP SETUP

42
1. MAC ADDRESS - Displays the MAC
address. MAC address cannot be changed
and is unique to each system.
2. DHCP MODE - Set the DHCP mode to
Manual or Automatic.
• When DHCP is set to Automatic, the
settings will be retrieved from the
network router - and settings cannot be
changed manually.
• To turn off the DHCP automatic
detection, set the DHCP MODE to
DISABLE.
3. IP PORT - Manually Enter an IP Port
number. The default port is 50000
4. IP ADDRESS - Manually set the IP
address.
5. GATEWAY - Manually set the GATEWAY.
6. SUBNET - Manually set the SUBNET
MASK.

TCP/IP SETUP - DDNS SETUP

1. DDNS ENABLE - Turns the DDNS
Function ON/OFF.
2. DNS SERVER - Enter the DNS Server's IP
address. Use Mouse Wheel to change the
value. The default IP is 202.133.244.128
3. INTERVAL - Set the interval for the system
to report its IP address to the DDNS server
automatically. (D- day / H- hour / M-