Lorex VANTAGE LH110 ECO SERIES Instruction Manual page 164

Troubleshooting the video display
Manually setting the DVR output mode
You can set the DVR to always output to the VGA port by manually configuring the output
settings.
To manually adjust the output settings:
1 Right-click and click Main Menu.
2 Click Advanced>A/V Setup.
3 In the Output Device drop-down menu, select VGA.
NOTE: In the 16-channel model, select VGA in the Init DEV drop-down menu.
4/8 Channel
16 Channel
4 Click Apply to save your settings.
150
Select VGA
Select VGA