Mounting The Scanner To A Surface; Attaching The Mounting Bracket - Motorola SYMBOL LS7708 Product Reference Manual

1-10 Symbol LS7708 Product Reference Guide

Mounting the Scanner to a Surface

The Symbol LS7708 is designed to sit on top of a counter or be mounted to a wall. The back of the scanner has a slot that accepts a
mounting bracket to secure it to the mounting surface. The bracket accommodates either mounting option and, once attached to the
scanner, keeps all cables securely in place.

Attaching the Mounting Bracket

Before attaching the scanner to the mounting bracket, remove the oval-shaped rubber feet on the bottom of
the scanner.
Note
Freestanding Configuration
To set the scanner for freestanding configuration:
1. Connect all interface and power cables to the scanner (see
mounting and cable configuration (see
2. Turn the scanner so its bottom is facing up and the connections are visible.
3. Orient the mounting bracket so that the plastic tab is facing down and toward the slot on the back of the scanner, and the
square cushion on the mounting bracket is above the power cable.
4. Tilt the plastic tab into the slot on the scanner, and rotate the opposite edge downward. As the bracket rotates, push it
toward the slot so that the feet of the bracket lie flat against the scanner's bottom.
Figure 1-3 on page
Figure 1-4).
1-7). Route the cables appropriately for the