Set Lengths For Discrete 2 Of 5 - Motorola SYMBOL LS7708 Product Reference Manual

13-76 Symbol LS7708 Product Reference Guide
Set Lengths for Discrete 2 of 5 (continued)
Two Discrete Lengths - This option allows decoding of only those D 2 of 5 symbols containing either of two selected lengths.
Lengths are selected from the numeric bar codes beginning on page D-1 in Appendix D, Numeric Bar Codes. For example, to decode
only those D 2 of 5 symbols containing either 2 or 14 characters, select D 2 of 5 - Two Discrete Lengths, then scan 0, 2, 1, and
then 4. If an error occurs, or to change the selection, scan Cancel on page D-8.
D 2 of 5 - Two Discrete Lengths
Length Within Range - This option allows decoding of a D 2 of 5 symbol with a specific length range. The length range is
selected from numeric bar codes beginning on page D-1 in Appendix D, Numeric Bar Codes. For example, to decode D 2 of 5
symbols containing between 4 and 12 characters, first scan D 2 of 5 - Length Within Range. Then scan 0, 4, 1, and 2 (single digit
numbers must always be preceded by a leading zero). If an error occurs, or to change the selection, scan Cancel on page D-8.
D 2 of 5 - Length Within Range