Hand-Held Laser Scanner Default Parameters; Beep After Good Decode - Motorola SYMBOL LS7708 Product Reference Manual

11-4 Symbol LS7708 Product Reference Guide
When this type of hand-held scanner is connected, program the primary scanner by scanning parameter bar codes with the primary
scanner.
To determine the type of hand-held scanner used, plug the scanner into the Scanner port. Using the hand-held scanner, scan a
parameter bar code. If the primary scanner issues a warble beep, the hand-held scanner supports the programming modes. If the
hand-held scanner issues a warble beep, it does not support these modes.

Hand-Held Laser Scanner Default Parameters

Table 11-1 lists the defaults for Hand-Held Laser Scanner Port parameters. To change any option, using the primary scanner only,
scan the appropriate bar code(s) beginning in
Programming Mode

Beep After Good Decode

Hand-Held Laser Scanner Options on page
Table 11-1. Hand-Held Lase Scanner Default Parameters
Parameter
Program Primary Scanner Only
Disable
11-5.
Default Page Number
11-5
11-7