Timeout Between Decodes - Motorola SYMBOL LS7708 Product Reference Manual

4-12 Symbol LSSymbol LS7708 Product Reference Guide

Timeout Between Decodes

Timeout Between Decodes, Same Symbol
This parameter sets the minimum time between decodes of the same symbol. It is programmable in 0.1-second increments from 0.0
to 9.9 seconds. Setting this above 0.4 seconds is recommended. The default for this parameter is 0.6 seconds.
Scan the bar code below to select a new timeout. Next, scan two numeric bar codes beginning in
that correspond to the desired timeout. Include a leading zero for single digit numbers. For example, to set a timeout of 0.5 seconds,
scan the bar code below, then scan the "0" and "5" bar codes. If an error occurs, or to change the selection, scan Cancel on page D-8.
Timeout Between Decodes, Different Symbol
This parameter sets the minimum time between decodes of different symbols. It is programmable in 0.1-second increments from 0.0
to 9.9 seconds. The default for this parameter is 0.2 seconds.
Scan the bar code below to select a new timeout. Next, scan two numeric bar codes beginning in
that correspond to the desired timeout. Include a leading zero for single digit numbers. For example, to set a timeout of 0.5 seconds,
scan the bar code below, then scan the "0" and "5" bar codes. If an error occurs, or to change the selection, scan Cancel on page D-8.
Timeout Between Same Symbol
Timeout Between Different Symbol
Numeric Bar Codes on page D-1
Numeric Bar Codes on page D-1