Configuring The Digital Scanner; Mounting The Digital Scanner; Wall Mount Bracket - Motorola DS9208 Product Reference Manual

1 - 4 DS9208 Product Reference Guide

Configuring the Digital Scanner

To configure the digital scanner use the bar codes included in this manual, or use the 123Scan
program. See Chapter 4, User Preferences & Miscellaneous
Chapter 10, Symbologies
Chapter 11, 123Scan2
to set up connection to a specific host type.

Mounting the Digital Scanner

Wall Mount Bracket

An optional wall mount bracket is available for mounting the scanner to a wall or other vertical surface. For a
template that facilitates screw placement, see
To mount the DS9208:
Place the bracket in its desired location on the wall, and insert two #8 screws through each screw hole in
1.
the bracket.
NOTE Select a screw type and length appropriate for the wall material.
Installing the Wall Mount Bracket
Figure 1-3
Tighten the screws to secure the bracket to the wall.
2.
for information about programming the digital scanner using bar code menus. See
for information on using this configuration program. Also see each host-specific chapter
Mounting Templates on page
Options, Chapter 5, Imaging
1-8.
2
configuration
Preferences, and