Set Lengths For Codabar - Motorola SYMBOL LS7708 Product Reference Manual

Set Lengths for Codabar

The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains.
Lengths for Codabar may be set for any length, one or two discrete lengths, or lengths within a specific range.
When setting lengths for different bar code types by scanning single digit numbers, single digit numbers
must always be preceded by a leading zero.
Note
One Discrete Length - This option allows decoding of only those Codabar symbols containing a selected length. Lengths are
selected from the numeric bar codes beginning on page
symbols with 14 characters, scan Codabar - One Discrete Length, then scan 1 followed by 4. If an error occurs, or to change the
selection, scan Cancel on page D-8.
D-1 in Appendix D, Numeric Bar
Codabar - One Discrete Length
Codes. For example, to decode only Codabar
Symbologies 13-79