Motorola SYMBOL LS7708 Product Reference Manual page 308

13-80 Symbol LS7708 Product Reference Guide
Set Lengths for Codabar (continued)
Two Discrete Lengths - This option allows decoding of only those Codabar symbols containing either of two selected lengths.
Lengths are selected from the numeric bar codes beginning on page D-1 in Appendix D, Numeric Bar Codes. For example, to decode
only those Codabar symbols containing either 2 or 14 characters, select Codabar - Two Discrete Lengths, then scan 0, 2, 1,
and then 4. If an error occurs, or to change the selection, scan Cancel on page D-8.
Codabar - Two Discrete Lengths
Length Within Range - This option allows decoding of a Codabar symbol with a specific length range. The length range
is selected from numeric bar codes beginning on page D-1 in Appendix D, Numeric Bar Codes. For example, to decode Codabar
symbols containing between 4 and 12 characters, first scan Codabar - Length Within Range. Then scan 0, 4, 1, and 2 (single digit
numbers must always be preceded by a leading zero). If an error occurs, or to change the selection, scan Cancel on page D-8.
Codabar - Length Within Range