Oil Lubrication - DURKOPP ADLER 906 Operating Instructions Manual

Setup

8.6 Oil lubrication

For lubricating the machine, use only lubricating oil DA 10 or oil of equiv-
alent quality with the following specifications:
• Viscosity at 40 °C: 10 mm²/s
• Flash point: 150 °C
Operating Instructions 906 - 02.0 - 11/2016
CAUTION
Risk of injury from contact with oil!
Oil can cause a rash if it comes into contact with
skin.
Avoid skin contact with oil.
If oil has come into contact with your skin, wash the
affected areas thoroughly.
CAUTION
Risk of environmental damage from oil!
Oil is a pollutant and must not enter the sewage
system or the soil.
Carefully collect up used oil.
Dispose of used oil and oily machine parts in
accordance with national regulations.
NOTICE
Machine damage possible from incorrect oil level!
Too little or too much oil can cause damage to the machine.
Ensure the oil level conforms to the information in the Operating
Instructions ( p. 111).
NOTICE
Machine damage possible due to incorrect oil!
Incorrect oil types can result in damage to the machine.
Only use oil that complies with the data in the instructions.
111