Appendix
12.3.7 Library commands
12.3.7.1
ADIC library with DAS server
ejects cartridges from the AML
[via the eject area]
inserts [normal data] cartridges
[via the insert area] in the AML
Further information is provided in the DAS manual.
12.3.7.2
StorageTek Library with ACSLS server
Eject volumes [of a cartridge pool]
from the library
Make manual mode CAP ready to
enter labelled carts [into a
cartridge pool]
Further information is provided in the ACSLS manuals.
12.3.7.3
Fujitsu Library with LMF server (PLP)
Eject volume to MailSlot
Enter volume from MailSlot
Further information is available in the following PLP manuals:
–
FUJITSU LMF SERVER/CLIENT USER'S GUIDE
–
ETERNUS LT270 TAPE LIBRARY UNIT INSTALLATION INSTRUCTIONS
–
ETERNUS LT270 Tape Library User's Guide
–
ETERNUS LT270 Setup Guide
–
ETERNUS LT270 Tape Library Maintenance Guide
U41117-J-Z125-7-76
dasadmin eject2 [-c] [-t media-type]
volserrange area
dasadmin insert2 -n area
eject cap_id vol_id | volrange ...
enter cap_id
/opt/FJSVlmf/bin/lmeject <volume_name>
(on LMF server)
/opt/FJSVlmf/bin/lmenter
(on LMF server)
Transferring volumes
571