Fujitsu Siemens Computers pmn User Manual page 218

Function bar
next-bl Block number of the free range. This indicates the physical utilization level.
LVs
val
cap/GB
valid/GB
valid %
If you have selected "all-cleaning", you will see, for example, the following overview:
218
_r__ Read volume on which no space is available for further data
_rd_ The cartridge is full but an attempt is still made to write the directory onto
the tape
s___ The PV must be scanned (used for transfer).
_v__ Ejected in the case of vault groups
_w__ Write volume that can still be used for save operations
_wd_ The cartridge is not yet full; currently there is no directory on the tape
____ Unknown: status in the case of Transfer-In for a PV that must still be
scanned
Number of saved logical volumes
Number of valid saved logical volumes; copies of volumes not included here are no
longer relevant
Gross capacity without data compression. This is not specified for volumes prior to
initialization (State = new).
i
This value is only indicated if supplied by the drive. Otherwise, the value 0
is displayed.
Used capacity; volume of data actually stored. Due to data compression, this value
may exceed the total capacity (previous column).
i
This only takes into consideration the data compression of the drive. The
data compression of the device emulations can be displayed in "Global
Status" along with the cache data. In many cases, the compression
indicated by PLM is lower if the cache data has already been compressed.
Utilization; specifies the percentage of the stored data that is currently still relevant.
This percentage determines whether the volume is to be included in the next
reorganization.
GXCC
U41117-J-Z125-7-76