Fujitsu Siemens Computers pmn User Manual page 165

GXCC
Procedure
If you were able to start the tool, first a window will open which explains the further
procedure. This procedure consists of the following steps:
1. Select the component to be repaired: GXCC or XTCC
2. Select the remote system from which the compressed archive of the selected
component is to be fetched.
3. Execute the "Get Remote / Expand Local File" tool:
Here only the "Remote Password" need be entered; all other parameters are already
specified and may NOT be changed.
Click on "Get Remote" to start data transfer from the remote to the local system. If this
is completed successfully the message "Ready for Expand Local" appears.
Click on "Expand Local" to extract the files from the archive into the master directory of
the selected component.
If this is completed successfully the message "Extraction finished" appears. Then close
the window with "Cancel".
4. Execute the "Update / Revert" tool:
Click on "Revert" to use the files just extracted to create a GXCC or XTCC version which
corresponds to the version of the remote system. After the message "Revert done" has
appeared click on "Cancel" to close the window.
U41117-J-Z125-7-76
Function bar
165