Canon ImageRUNNER 2830 Facsimile Manual page 56

1
1 2
8
5
4
7 8
0
9
1-32
Flow of Sending Operations
If the following screen is displayed, follow the instructions on the touch panel
display ➞ press
(Start) once for each original. When scanning is complete,
press [Done].
Scanning starts.
The scanned data is sent to the specified destination when scanning is complete.
IMPORTANT
The size of the original is detected automatically. However, if the output paper in
the recipient's machine is not equal to the scanned document size, the original
image may be reduced in size to match it.
3
If you want to cancel sending, press
6
9
NOTE
•
You can press (Stop) to cancel a send job that is being scanned.
•
For instructions on canceling a send job, see "Canceling a Job," on p. 1-42.
•
You can also cancel a send job from the System Monitor screen. (See "Using the
System Monitor Screen," on p. 1-43.)
When scanning is complete, remove your originals.
(Stop).