Canon ImageRUNNER 2830 Facsimile Manual page 283

IMPORTANT
You cannot set the same time for both the start time and end time.
NOTE
•
You can select [Everyday] for the Forward Start Time, and [Select Days] for the
Forward End Time, and vice versa.
•
If you make a mistake when entering the time, press
➞ enter another four digit number.
•
If the end time is set earlier than the start time, received documents will stop being
forwarded at the specified end time on the following day. For example:
Start time: 22:00, end time: 21:00; The end time refers to 21:00 of the following day.
•
If you do not want to specify the end time, press [Cancel].
•
The default setting is 'Off'.
To disable the Forward End Time, press [Forward End Time] ➞ [Off].
•
8
When all settings are complete, press [OK].
The selected modes are set.
9
Press [Done] repeatedly until the Fax Basic Features screen
appears.
(Clear) to clear your entry
Communications Settings
6
6-27