Zoom by Percentage
You can reduce or enlarge originals by any zoom ratio in 1% increments. Any ratio
from 50% to 200% can be set. The same zoom ratio is used for the horizontal (X)
and vertical (Y) axes.
1
Place your originals.
NOTE
For instructions on placing your originals, see "Placing Originals," on p. 1-34.
2
Press [Special Features] ➞ [Zoom TX].
If necessary, see the screen shot in step 2 of "Preset Zoom," on p. 3-29.
3
Press [-] or [+] to set the zoom ratio ➞ press [Done] ➞ [Done].
You can also use
clear your entry.
You can change the value by pressing [-] or [+], even if you have entered the
value using
The selected mode is set, the display returns to the Fax Basic Features screen,
and the specified zoom ratio is displayed.
NOTE
If you enter a value outside the setting range, a message prompting you to enter an
appropriate value appears on the screen.
-
(numeric keys) to enter the value, and
-
(numeric keys).
(Clear) to
Changing the Zoom Ratio
3
3-31