Canon ImageRUNNER 2830 Facsimile Manual page 295

4
Select [For Error Only], [On], or [Off].
● If you select [For Error Only] or [On]:
❑
Select [On] or [Off] for <Report With TX Image> ➞ press [OK].
Report With TX Image
[On]: Part of the sent document is printed on the report.
[Off]: The contents of the sent document are not printed on the report.
The selected mode is set.
● If you select [Off]:
❑
Press [OK].
The TX Report is not printed.
The selected mode is set.
Specifying Report Settings
7
7-5