Canon ImageRUNNER 2830 Facsimile Manual page 320

# 701
Cause
Remedy
# 702
Cause
Remedy 1 Wait a few moments, and try again after other send jobs complete.
Remedy 2 Do not send the document to too many recipients at the same time. Send the
# 703
Cause
Remedy 1 Wait a few moments, and try again after other send jobs complete.
Remedy 2 Erase documents stored in inboxes. If the machine still does not operate
# 704
8
Cause
Remedy
# 706
Cause
Remedy
# 711
Cause
Remedy
8-12
Error Messages
The specified Department ID does not exist, or the password has changed.
Enter the correct Department ID or password using
the control panel, and try sending again.
The document could not be sent because the memory is full.
document to a smaller number of recipients.
The memory for the image data is full.
normally, turn the main power OFF, and then back ON.
An error occurred while reading address information from the Address Book.
Check the address settings. If the machine still does not operate normally, turn
the main power OFF, and then back ON.
The Address Book is being imported or exported from the Remote UI, or it is
being used by another sending component.
Wait until the Address Book Import/Export function from the Remote UI or the
other sending component is complete, and try sending again.
The inbox memory is full.
Erase unnecessary documents stored in the inbox. (See "Printing and Erasing
Documents," on p. 3-11, and Chapter 5, "Using/Arranging Documents Stored in
an Inbox," in the Mail Box Guide.)
- (numeric keys) on