4
3
3-32
Changing the Zoom Ratio
Specify the destination ➞ press
For more information on specifying the destination, see "Dialing Methods," on p.
2-16.
If the original is placed on the platen glass, follow the instructions that appear on
the touch panel display ➞ press
is complete, press [Done].
Scanning starts.
The scanned data is sent to the specified destination when scanning is complete.
NOTE
•
To return the ratio to 100%, press [Direct].
•
To cancel all settings and return the machine to the Standard mode, press
(Reset).
(Start).
(Start) once for each original. When scanning