Canon ImageRUNNER 2830 Facsimile Manual page 138

3
3
4
3-30
Changing the Zoom Ratio
To reduce the original image, select a preset reduction ratio.
To enlarge the original image, select a preset enlargement
ratio. Following your selection, press [Done] ➞ [Done].
The selected mode is set, the display returns to the Fax Basic Features screen,
and the selected zoom ratio is displayed.
Specify the destination ➞ press
For more information on specifying the destination, see "Dialing Methods," on p.
2-16.
If the original is placed on the platen glass, follow the instructions that appear on
the touch panel display ➞ press
is complete, press [Done].
Scanning starts.
The scanned data is sent to the specified destination when scanning is complete.
NOTE
•
To return the ratio to 100%, press [Direct].
•
To cancel all settings and return the machine to the Standard mode, press
(Reset).
Enlargement
Ratios
Reduction
Ratios
(Start).
(Start) once for each original. When scanning