Canon ImageRUNNER 2830 Facsimile Manual page 321

# 712
Cause The maximum number of documents is already stored in the inbox.
Remedy Erase unnecessary documents stored in the inbox. (See "Printing and Erasing
Documents," on p. 3-11, and Chapter 5, "Using/Arranging Documents Stored in
an Inbox," in the Mail Box Guide.)
# 829
Cause Data that contains more than 1,000 pages is received.
Remedy This machine can print or store up to 999 pages of data in memory, but will
delete any data that exceeds this limit. Ask the sender to resend the remaining
pages.
# 847
Cause Could not save the received document in the Memory Box, as the memory of
the Memory Box is full.
Remedy Erase unnecessary documents stored in the inbox. (See "Printing and Erasing
Documents," on p. 3-11, and Chapter 5, "Using/Arranging Documents Stored in
an Inbox," in the Mail Box Guide.)
# 851
Cause 1 There is insufficient memory remaining in the system.
Remedy Check the system's available memory, and delete unnecessary documents in
the inboxes. (See "Printing and Erasing Documents," on p. 3-11, and Chapter 5,
"Using/Arranging Documents Stored in an Inbox," in the Mail Box Guide.)
Cause 2 The scanned document cannot be stored because there are more than 2,000
documents in the specified inbox.
Remedy Erase unnecessary documents stored in the specified inbox. (See "Printing and
Erasing Documents," on p. 3-11, and Chapter 5, "Using/Arranging Documents
Stored in an Inbox," in the Mail Box Guide.)
# 852
Cause An error occurred because the main power switch was turned OFF while a job
was being processed.
Remedy Check to see if the main power switch is turned ON. Try processing the job
again, if necessary.
8-13
Error Messages
8