Initializing The Standard Settings - Canon ImageRUNNER 2830 Facsimile Manual

5
5
6

Initializing the Standard Settings

You can restore the Standard Settings to their default settings.
1
5-16
User Settings
● If you selected [Resolution/Density/Image Quality]:
❑
Specify the desired settings ➞ press [Done].
NOTE
•
For instructions on specifying the resolution, density, and image quality, see
"Resolution, Density, and Image Quality," on p. 2-2.
•
For instructions on setting Direct Sending, see "Direct Sending," on p. 2-8.
•
For instructions on setting the Stamp mode, see "Stamping Originals," on p. 2-14.
•
To cancel setting the standard fax settings, press [Cancel].
Press [OK].
The selected mode is set.
Press [Done] repeatedly until the Fax Basic Features screen
appears.
(Additional Functions) ➞ [Custom Fax Settings] ➞
Press
[User Settings].
If necessary, see the screen shots in steps 1 and 2 of "Registering the Standard
Key," on p. 5-4.