Canon ImageRUNNER 2830 Facsimile Manual page 226

5
5-60
Printing Received Documents
❑
If you selected [Fix. Red.], press [-] or [+] to specify the reduction ratio.
You can specify the reduction ratio from 75% to 97% in 1% increments.
NOTE
•
You can also use -
•
You can change the value by pressing [-] or [+], even if you entered the value using
- (numeric keys).
❑
Select [Ver. Hor.] or [Vertical Only] for <Reduce Direction> ➞
press [OK].
Reduce Direction
[Ver. Hor.]: The image is reduced in both the vertical and horizontal
directions.
[Vertical Only]: The image is reduced in the vertical direction only.
The selected mode is set.
(numeric keys) to enter the value.