Canon ImageRUNNER 2830 Facsimile Manual page 318

# 012
Cause
Remedy
# 018
Cause 1
Remedy
Cause 2
Remedy
Cause 3
Remedy
Cause 4
Remedy 1 Insert a pause after the country code, or after the fax number of the other party,
8
Remedy 2 Change the Long Distance setting on the Option screen if you are sending
# 022
Cause 1
Remedy
Cause 2
Remedy
8-10
Error Messages
The document could not be sent because the receiving fax machine was out of
paper.
Ask the receiving party to load paper into their fax machine.
The receiving machine did not respond when your machine redialed.
Confirm that the receiving machine is able to communicate, and try again.
The documents could not be sent because the receiving machine was
performing another task.
Confirm that the receiving machine is able to communicate, and try again.
The settings on your machine do not match the settings on the receiving
machine.
Check that the settings on your machine match those on the receiving machine,
and that the receiving machine is able to communicate, and try again.
No pause was included in the telephone number when sending a fax overseas.
and then dial the number again. (See "Dialing Methods," on p. 2-16.)
documents to destinations stored in the Address Book. To access the Long
Distance setting, press
[Register Destinations] ➞ [Register] ➞ [Option]. (See "One-Touch Speed
Dialing Settings," on p. 5-26.)
Transferring could not be performed because all of the addresses stored in the
specified group destination have been deleted.
Re-enter the group destinations, and try sending again.
Transmission could not be performed because the specified destination was
deleted while the documents were waiting to be sent.
Re-enter the destination in the Address Book, and try sending again.
(Additional Functions) ➞ [Custom Fax Settings] ➞