Canon ImageRUNNER 2830 Facsimile Manual page 271

Enter all four digits of the time (including zeros), using 24-hour notation.
Examples: 7:05 a.m.
11:18 p.m.
If [Select Days] is selected, press [Next] ➞ select a day of the week ([Sun] to
[Sat]) ➞ select a number ([1] to [5]) ➞ enter the end time using
(numeric keys) ➞ press [OK].
-
You can store up to five different end times for each day of the week.
Enter all four digits of the time (including zeros), using 24-hour notation.
Examples: 7:05 a.m.
11:18 p.m.
If [Off] is selected, the Memory Lock mode will not end automatically at a
specified time. You can manually turn off the Memory Lock mode using the RX
mode from the Special Features screen. (See "Changing the Reception
Mode," on p. 3-17.)
NOTE
•
You can select [Everyday] for the Memory Lock Start Time, and [Select Days] for
the Memory Lock End Time, and vice versa.
•
If you make a mistake when entering the end time, press
entry ➞ enter another four digit number.
•
If you do not want to specify the end time, press [Cancel].
•
The default setting is 'Off'.
To disable the Memory Lock End Time, press [Memory Lock End Time] ➞ [Off].
•
➞
0705
➞
2318
➞
0705
➞
2318
Communications Settings
(Clear) to clear your
6-15
6