IBM 8645 - Eserver xSeries 220 Hardware Maintenance Manual page 34

Ethernet teaming messages:
26
Hardware Maintenance Manual: xSeries 220 Type 8645
Table 6. NDIS (Windows NT or Windows 2000) driver teaming messages for the Ethernet
controller
Event ID Type
Error
01
02 Error
03 Error
04 Error
05 Error
06 Informational
07 Informational
08 Informational
09 Informational
10 Warning
11 Informational
12 Warning
Informational
13
14 Informational
15 Error
16 Informational
17 Informational
18 Informational
Description
Explanation: Team Name and physical adapter name
are the same. This is an invalid configuration. Action:
Reconfigure the adapter team by double-clicking the
PROSet icon in the control panel.
Explanation: Unable to allocate required resources.
Action: Free some memory resources and restart.
Explanation: Unable to read required registry
parameters. Action: Reconfigure the adapter team by
double-clicking the PROSet icon in the control panel.
Explanation: Unable to bind to physical adapter. Action:
Reconfigure the adapter team by double-clicking the
PROSet icon in the control panel.
Explanation: Unable to initialize an adapter team.
Action: Reconfigure the adapter team by double-clicking
the PROSet icon in the control panel.
Explanation: Team nn. Primary adapter is initialized.
Action: None.
Explanation: Team nn. Secondary adapter is initialized.
Action: None.
Explanation: Team nn. Virtual adapter or Team is
initialized. Action: None.
Explanation: Team nn. Primary adapter is switching
over. Action: None.
Explanation: Team nn. Adapter link down. Action:
Make sure the adapter is functioning properly.
Explanation: Team nn. Secondary adapter took over.
Action: None.
Explanation: Team nn. Secondary adapter is deactivated
from the Team. Action: Make sure the secondary
adapter is functioning properly and that the adapter
cable is securely connected to the LAN.
Explanation: Team nn. Secondary adapter has rejoined
the Team. Action: None.
Explanation: Team nn. Secondary adapter link is up.
Action: None.
Explanation: Team nn. The last adapter has lost its link.
Network connection has been lost. Action: Shut down
the server and replace the adapters; then, restart the
server to reestablish the connection.
Explanation: Team nn. An adapter has re-established the
link. Network connection has been restored. Action:
None.
Explanation: Team nn. Preferred primary adapter has
been detected. Action: None.
Explanation: Team nn. Preferred secondary adapter has
been detected. Action: None.