Table of Contents
Advertisement
Error Code/Symptom
201-XXX-999 (Multiple DIMM
failure, see error text.)
202-XXX-001 (Failed System
Cache test)
202-XXX-002 (Failed System
Cache test)
206-XXX-000 (Failed Diskette
Drive test)
215-XXX-000 (Failed IDE
CD-ROM test)
217-XXX-000 (Failed BIOS
Fixed Disk test)
Note: If RAID is configured,
the fixed disk number refers
to the RAID logical array.
217-XXX-001 (Failed BIOS
Fixed Disk test)
Note: If RAID is configured,
the fixed disk number refers
to the RAID logical array.
217-XXX-002 (Failed BIOS
Fixed Disk test)
Note: If RAID is configured,
the fixed disk number refers
to the RAID logical array.
264-XXX-0NN (NN = SCSI ID
of failing Tape Drive)
264-XXX-999 (Errors on
multiple tape drives, see
error text for more info)
301-XXX-000 (Failed
Keyboard test)
405-XXX-000 (Failed Ethernet
test on controller on the
System Board)
405-XXX-00N (Failed Ethernet
test on adapter in PCI slot N)
415-XXX-000 (Failed Modem
test)
110
Hardware Maintenance Manual: xSeries 220 Type 8645
FRU/Action
1. See error text for failing DIMMs
1. Microprocessor CPU 1
1. Microprocessor CPU 2
1. Cable
2. Diskette Drive
3. System Board
1. CD-ROM Drive Cables
2. CD-ROM Drive
3. System Board
1. Fixed Disk 1
1. Fixed Disk 2
1. Fixed Disk 3
1. Tape Cartridge, if user executed the Read/Write Tape Drive test (XXX = 256)
2. SCSI or power cable connected to the tape drive with SCSI ID NN
3. Tape drive with SCSI ID NN – refer to Help and Service Information appendix of
tape drive's User Guide.
4. I/O Legacy Board or SCSI Controller – run SCSI Controller diagnostic to
determine of SCSI bus is functioning properly.
1. See error messages/text in the PC Doctor error log for detailed information on
each individual tape drive error.
1. Keyboard
1. Verify that Ethernet is not disabled in BIOS.
2. System Board
1. Adapter in PCI slot N.
2. System Board
1. Cable
2. Modem
3. System Board
Advertisement
Table of Contents
