Table of Contents
Advertisement
Error Code/Symptom
00180300 (No more memory
(above 1MB for PCI adapter)
00180400 (No more memory
(below 1MB for PCI adapter)
00180500 (PCI option ROM
checksum error)
00180600 (PCI device built-in
self test failure)
00180700 (xxxxyyyy planar
PCI device not responding
(where xxxx is PCI vendor ID
and yyyy is PCI device ID)
00180800(Unsupported PCI
device installed)
00181000 (PCI error)
01295085 (ECC checking
hardware test error)
01298001 (No update data for
microprocessor 1)
01298002 (No update data for
microprocessor 2)
01298101 (Bad update data
for microprocessor 1)
01298102 (Bad update data
for microprocessor 2)
01298200 (Microprocessor
speed mismatch)
I9990301 (Fixed boot sector
error)
I9990305 (Fixed boot sector
error, no operating system
installed)
I9990650 (AC power has been
restored)
116
Hardware Maintenance Manual: xSeries 220 Type 8645
FRU/Action
1. Run Configuration/Setup
2. Failing Adapter
3. System Board
1. Run Configuration/Setup
2. Failing Adapter
3. System Board
1. Remove Failing PCI Card
2. System Board
1. Run Configuration/Setup
2. Failing Adapter
3. System Board
1. System Board
2. PCI Card
1. System Board
2. PCI Card
1. System Board
2. PCI Card
1. System Board
2. Microprocessor
1. Ensure all microprocessors are the same stepping level and cache size.
2. Microprocessor 1
1. Ensure all microprocessors are the same stepping level and cache size.
2. Microprocessor 2
1. Ensure all microprocessors are the same stepping level and cache size.
2. Microprocessor 1
1. Ensure all microprocessors are the same stepping level and cache size.
2. Microprocessor 2
1. Ensure all microprocessors are the same speed.
1. Hard Disk Drive
2. If RAID system, refer to the Hardware Maintenance Manual for the specific
RAID adapter.
3. SCSI Backplane
4. Cable
5. System Board
1. Install operating system to hard disk drive.
1. Check cable
2. Check for interruption of power supply
3. Power Cable
Advertisement
Table of Contents
