Operating The System Without Supplies Installed - Brady POWERMark User Manual

Operating the system without supplies installed

The supplies you install in the system determine the physical characteristics of the labels
you create and edit. But under certain circumstances, you may want to power on the
system without installing supplies first. The system then prompts you for the supply
attributes you will eventually use to print the label you create.
It first asks you to load the tape or ribbon, as shown in this example:
Unknown supply type. Reload tape.
Press any key to continue.
The message displays until you press a key to continue. If you do not install a tape, the
system starts prompting you to provide the supply attributes—that is, for a tape, the width,
for a ribbon, the type and colors if the type is paneled—for the new label. For example:
Tape width:
Press ←→, ENTER or ESCAPE
The choices you make are kept with the label you create, and are active for your current
work session.
Printing
Tape
10 in
4-7