Brady POWERMark User Manual page 19

• Grasp both sides of the ribbon cartridge case and pull it toward you, compressing the spring
on the near side of the printer. When the far side of the gray ribbon roll inserts no longer
cover the blue drive cones, lift the ribbon cartridge case out of the printer.
4) Set the ribbon cartridge case on a flat surface and open the case. If the case contains a
ribbon, lift it out of the case. Place the case so that the white "Flag here" label is on the
far side of the case.
System Basics
"Flag here" label
Ribbon wiper is located here
beneath the ribbon cartridge.
1-9