Brady POWERMark User Manual page 77

4) Repeat steps 2 and 3 if you want to choose settings for other label options.
5) Press Enter when all of the settings you want to use are displayed.
One of the following appears:
If you are working in the normal text entry area (not in a standard layout), the following
•
message appears. To apply the change, choose Yes. If you don't want to make the
change, choose No.
If you are working in a standard layout, the Make Change window displays. Press the
•
↑ or ↓ key to highlight the option you want to use (see the table below). Then press
the Enter key.
Make Change option
At beginning of text
At beginning of area
After making a selection in one of the windows, you are returned to the text entry area. If you
applied the option, a change marker representing the option change appears in the text entry
area ( ).
Note: The setting you chose stays in effect for all labels until you
either change the setting or turn the system off. Repeat these steps when
you want to reset an option.
Label Design
This change affects all labels in the
file. Continue?
Make Change
At beginning of text
At beginning of area
Press ↑↓, ENTER or ESC
What it does
Changes the option for all text in the text buffer.
Changes the option for all text starting with the current
area.
Yes
3-21