Brady POWERMark User Manual page 65

To change one or more type options:
1) Press the Type Options key where you want the option(s) to take effect.
The Type Options window displays.
2) Press the ↑ or ↓ key to move the cursor to the option you want to set.
3) When the option you want to set is highlighted, press the ← or → key to scroll through
the available option settings.
Type option
Color
Label Design
Type Options
Color:
Expand/Condense:
Italics:
Underline:
Press ↑↓←→, ENTER or ESCAPE
What to do
Select a color for the text. The default is the first color value stored in the memory
cell of the installed ribbon, or black if no ribbon is installed.
• If either a paneled ribbon or a continuous color monochrome ribbon is
installed, you can choose from the entire color palette. The colors
available on that ribbon are listed first, and are identified by asterisks
around the color name, as shown on the Type Options screen example
above. When you print, you will be prompted when you need to install a
different color ribbon. You can cycle through the color list.
• If a continuous color monochrome ribbon is installed, the color of the
installed ribbon is displayed but you cannot change the color setting.
• If no ribbon is installed, when you turned on the system you were asked
to choose whether you wanted to create labels based on a paneled or
monochrome ribbon type. If you chose Paneled, you also chose the
paneled ribbon colors you wanted to use; those colors are available for
selection.
For more information, see
page 2-6.
*Black*
100%
Off
Off
How installed ribbons affect label composition on
3-9