Brady POWERMark User Manual page 54

4) Repeat these steps if you want to choose settings for other label options.
5) Press Enter when all of the settings you want to use are displayed.
The Make Change window displays. Press the ↑ or ↓ key to highlight the option you want to
use (see the table below). Then press the Enter key.
Make Change option
At beginning of text
At beginning of area
After making a selection, you return to the text entry area. If you applied the option to the
beginning of the area, a change marker representing the option change appears in the text entry
area ( ). Repeat these steps when you want to reset an option.
Note: The only label option you cannot set for an individual area is the
Mirror option. If you change this option within a standard layout, you'll
see a message stating that the change will affect all labels in the text
buffer.
2-14
Make Change
At beginning of text
At beginning of area
Press ↑↓, ENTER or ESCAPE
What it does
Changes the option for all text in the text buffer.
Changes the option for all text starting with the current area.
Using standard layouts