Adding lines, labels and areas to freeform
labels
This section explains:
•
How to add lines, labels and areas when you are creating a freeform label
•
How to create multiple line labels and how to correct multiple line design issues
•
How to create labels with multiple areas
Creating labels with multiple lines
You'll often want to create labels that contain more than one line of text:
•
To start a new line of text as you type a label, press the Enter key. The cursor moves down one
line, and you can begin typing the text for the new line.
•
To split text in a line you've already typed, use the arrow keys to move the cursor to where the
new line should begin. Press Enter, and all text following the cursor moves down one line.
•
To insert a blank line between two lines you've already typed, move the cursor to the end of the
first line and press Enter. A blank line appears between the two lines, and all text following the
blank line moves down one line.
You can enter as many as 42 lines on a label, depending on the width of the tape, the type size,
the line spacing and/or the amount of space in the area (in a standard layout).
Label Creation
2-7