Setting System Defaults - Brady POWERMark User Manual

Setting system defaults

When you first turn your system on, the system automatically uses certain settings that are referred
to as system defaults. Unless you change these settings, the defaults are used. Use the Setup key to
change your system defaults. You can also use this key to set up names for tape and ribbon colors
and to access the operating system upgrade routine.
Note: The text buffer needs to be empty when you press the Setup key. If it
is not, the "Save and clear text to use this function" message displays. Press
Clear to empty the text buffer or press File and save the labels.
1) Press the Setup key.
The Setup window displays.
2) Press the ↑ or ↓ key to move the cursor to the option you want to set.
3) When the option you want to set is highlighted, press the ← or → key to scroll through
the available settings. (Refer to the table below.)
4) When the settings you want to use are displayed, press Enter.
The Setup options are described in the table on the following pages.
1-26
Setup
Automatic preview:
Leader/trailer length:
Justification:
Type size:
Press ↑↓←→, ENTER or ESC
On
0.500
Center
100
Setting system defaults