Manually Enter Settings; Loading Supplies; Loading Labels - Brady M710 User Manual

Manually Enter Settings

Use this method if you need to identify the network by static IP or DHCP. Contact your network
administrator for assistance.
To connect to a Wi-Fi wireless network:
1. Make sure the printer is turned on.
2. Press FN + Setup. (The Setup key is in the row of function keys. See
page
3. On the touchscreen, tap Wi-Fi.
4. Tap Advanced.
5. Under IP Settings tap one of the following.
•
•
6. Tap Prev.
7. Tap Join.

Loading Supplies

Brady labels and ribbons come equipped with smart-cell technology that enables the
printer to recognize the type of label and ribbon and automatically set many label
formatting details. Only use labels and ribbons that have the Brady Authentic logo.

Loading Labels

For optimum performance, use authentic Brady M710 labels. Labels designed for the M610 printer can
also be used, but require an adapter. See
Labels can be loaded with the power on or off.
Note: You can design a label on the printer without installing the label roll. However, if no label
supply is installed, the printer uses the characteristics of the last installed label supply to set
up the label. This means the dimensions or layout (like a two-sided sleeve rather than a flat
label) could be wrong for the label supply that you plan to print on.
M710 User Manual
4.)
DHCP: DHCP addressing is dynamic and the system uses a DNS server to obtain the printer
IP address for you.
Static: Select static addressing to manually enter the printer's IP address. Fill in the remaining
available settings with help from your network administrator.
"Using the Label Roll Adapter" on page 22
Setup
Loading Supplies
"Printer Components" on
for details.
16