Brady POWERMark User Manual page 43

3) Type this text: Emergency Number. Then press Enter.
If you make a mistake, use the Backspace key or the Delete key to erase characters. After you
press Enter, the cursor moves down one line in the display to indicate that you're starting a new
line on the label.
4) Type Building security: and press the space bar.
5) To underline the next text, press the Type Options key.
This key is one of the labeled function keys at the top of the labeling system keyboard. The
Type Options window appears in the preview area of the screen.
6) Press the ↓ key to move the cursor to the Underline option.
7) Press the → key to display "On" in the window. Then press Enter to return to the text
entry area.
Notice that a special character appears in the text entry area (
marker, and it indicates where you have turned the underlining on. (Refer to
page 1-19 for information.)
8) Type ext 524 and press the space bar.
Depending on the supplies you have installed, the Text too long message may appear as you are
typing long lines like this one. If this happens, you can press Enter to start a new line, and
continue to type. (See
information.) Alternatively, you can change the type size or font to accommodate the text you
want to enter in the space you have. See
information.
Label Creation
How installed ribbons affect label composition
Changing the look of the text
). This is called a change
Markers
on page 2-6 for more
on page 3-2 for that
on
2-3